Can you burn sweet gum in fireplace? The moisture content of 20 percent or less is okay for burning, but the optimal moisture content for Sweet Gumwood firewood is around 12 percent. Burning it with less than 20 percent moisture content gives off better BTUs, burns longer, and makes better coals.
What kind of wood should not be burned in a fireplace? Watch out for any wood covered with vines. Burning poison ivy, poison sumac, poison oak, or pretty much anything else with “poison” in the name releases the irritant oil urushiol into the smoke. Breathing it in can cause lung irritation and severe allergic respiratory problems, the Centers for Disease Control state.
Which firewood burns the longest? It’s simple, really: it takes longer for the fire to consume hardwood because there is more fuel “packed” into each log. Hickory has the highest density among firewood (37-58 lbs/ft.3), and therefore burns for the longest time.
What can be burned instead of wood? Hardwoods such as maple, oak, ash, birch, and most fruit trees are the best burning woods that will give you a hotter and longer burn time. These woods have the least pitch and sap and are generally cleaner to handle.
Can you burn sweet gum in fireplace? – Related Questions
Do i need chimney for gas fireplace?
Ventless fireplaces fueled by gas or propane rely on indoor air for combustion, and they exhaust a low level of their combustion gases into the room in which they’re located. A chimney or flue isn’t necessary. … In fact, ventless fireplaces generally are just for aesthetics and supplemental space heating.
Can i hang a lcd tv over a gas fireplace?
The short answer is – yes. However, to ensure your television isn’t damaged from the heat, care must be taken to ensure heat generated by the fireplace is redirected away from television. There are several ways to do this, such as installing a proper mantel and building an alcove for the television.
Why does my electric fireplace keep shutting off?
Overheating. An electric fireplace will automatically shut off when it starts to overheat. This is to prevent to the unit from overheating causing damage to the fireplace itself, or becoming a fire hazard for your home.
How to light up a gas fireplace?
Turn the knob from the “Off” to the “Pilot” position. Push in the pilot knob, which manually sends gas into the system. Push the igniter button once every second until it lights. Depending on how long it’s been since the gas fireplace was last used, ignition may take multiple attempts.
How to glaze paint fireplace?
Start from the top of the bricks and work your way down for an even application of paint. Apply more than one coat of paint as desired; additional coats will darken the paint color. Add a thin layer of glaze with a paintbrush over the newly painted fireplace bricks after the paint dries.
What color to paint inside fireplace?
Basic flat black fireplace paint is a good choice; it’s a neutral color and can hide soot easily. Black also tends to look nice with almost any fireplace and room decor. Beige, off-white, or almond create a fresh, bright look.
Do gas fireplaces have to have a glass front?
Not if your fireplace was shipped with a glass panel on the front. Direct vent fireplaces are sealed combustion systems and need the glass on to function properly. … The other type of gas fireplaces we sell, called B-vent fireplaces, come with fixed, not sealed, glass fronts.
Can you paint marble fireplace?
You can paint a marble fireplace and its surround. A marble fireplace adds visual appeal to any area of the home, attracting instant attention. Marble is a natural stone which is heavy and expensive to replace, so, painting it can restore its lustre and your room’s style with a contemporary overhaul.
How to clean fireplace soot off walls?
Mix one part warm water to three parts vinegar, then wipe gently with a soft sponge or microfiber cloth to remove soot from walls, ceilings, or woodwork. When cleaning finished wood, avoid allowing the vinegar to sit for too long. It only takes a few minutes for the vinegar to stain the surface.
Can you change the inside of a gas fireplace?
It can be done, but it’s worth looking at all options before committing to repair. Repairing your gas fireplace may be the better option if: The existing fireplace still fits your home aesthetically. There’s a minor mechanical problem or broken part.
How to find studs behind brick fireplace?
Standard electronic stud finders can easily detect these drywall studs, but a home with a brick facade requires a stud finder with a deep-scanning option; these facades can be up to 1 inch thick. Using a higher-end deep-scanning device will allow you to find studs through the facade with accuracy and speed.
Can i put a tv over a wood burning fireplace?
In most cases, you should not install electronics above wood-burning stoves or gas fireplaces and inserts because they produce massive amounts of heat. That heat could severely damage your tv or other electronic devices.
Can you wood to cover brick fireplace?
Both paneling and thin wood boards work well to cover the existing fireplace. … The International Building Code prohibits the installation of any combustible material, including wood, within 6 inches of the sides of a working fireplace.
Can you use glass tile around a fireplace?
Glass is not as popular for fireplaces because it is very difficult for a do-it-yourselfer to install in a clean, professional way. … Similar to ceramic tile, it is not the best choice for fireplace fronts, especially if it is on the floor. It can break and crack under heavy traffic and use.
Does a gas fireplace kill houseplants?
This is because the presence of gas eliminates oxygen in the air. With an alarming lack of oxygen, the plants in your house will be the first victims. They will slowly become devoid of breathable air, lose color, and die out.
Are there fake logs to burn in fireplace?
Artificial firelogs make good substitutes for wood in fireplaces, as long as you’re aware of some of the trade-offs. Artificial firelogs are basically big candles. Most are made from postindustrial sawdust, cellulose, and waxes.
How to open fireplace damper?
You should turn the knob clockwise, as far as it can go, or push the rod all the way up to open the damper. If there is a metal chain in or besides your fireplace, it means that your chimney has a top-mounted damper. If the chain is tightly attached to a hook, the damper is closed.
Does a fireplace have to be on an outside wall?
Fireplaces do not have to be on an outside wall. Fireplaces are usually installed on outside walls to make ventilation easier. This fact doesn’t mean that you have to install the fireplace on an outside wall. You just have to install the fireplace on a wall where there is a provision for proper ventilation.
Can a vented fireplace give off heat?
A vented gas log must be used in a regular fireplace, designed to burn a wood fire. … Some vented gas logs will give up to 25,000 BTU’s of heat but most don’t give hardly any heat.