Can you put hardwood flooring over carpet? You should not have problems if you wish to lay your wood flooring over carpet, as long as the carpet is fairly flat. This will prevent chances of having uneven surface to walk on because the foam padding of the carpet will cause your hardwood floor to spring or bounce.
Does human urine ruin hardwood floors? Urine stains on hardwood flooring can be the most difficult stains to remove. Repeated urine soiling will turn the area black. … In many cases sanding can remove the damaged wood so the flooring can be refinished. Treat the affected area with a stain remover before refinishing.
How do you get dog urine out of hardwood? To remove dog urine that’s soaked into your hardwood floor, wipe off the urine from the floor, spray hydrogen peroxide on the stained spots and cover them with a piece of cloth soaked in hydrogen peroxide for 15-20 minutes. Clean up the floor as usual to get rid of the odor and stains.
What removes nail polish from floor? Gently pat the rubbing alcohol onto any leftover nail polish on the floor and let it soak for about 5 minutes. If you don’t have rubbing alcohol, you can use hairspray instead. Never use nail polish remover on wood floors.
Can you put hardwood flooring over carpet? – Related Questions
How to restain hardwood floors darker without sanding?
The best way to refinish wood floors without sanding is to use a technique called screen and recoat. This involves scuffing up the finish with a floor buffer and applying a refresher coat of finish.
What is the best canister vacuum for hardwood?
Best overall canister vacuum/best for hard floors: Miele Classic C1 Turbo Team PowerLine ($399; amazon.com) The Miele Classic C1 Turbo Team PowerLine is a lightweight, maneuverable six-speed canister vacuum that’s downright pleasant to use.
What is the most effective way to clean hardwood floors?
Begin by dusting or sweeping your floors well. Then make a cleaning mixture using 4 cups warm water and a few drops of castile soap or dish soap. Do not shake, but gently mix this, then mop or scrub small sections at a time, drying them with a clean cloth or dry mop after.”
What is finger joint hardwood flooring?
A “finger joint” is a woodworking joint made by cutting a set of complementary, interlocking profiles into pieces of wood, which are then glued. … This technic of (wood) decoration is often used for panels, floors, and wall decorations.
How to determine the amount of hardwood floor to use?
At the most basic level, you simply need to multiply the width by the length of a room. This will give you the area. The most important thing to remember is that you will then need to allow an amount for wastage, between 7-10% for a board or strip floor and between 10-15% for parquet woodblocks.
Is curly maple a hardwood?
Prices can range from just slightly more expensive than regular maple for lower grades of curly maple, to many, many times higher for prices of the highest grades. However, curly maple tends to be one of the most economical hardwoods when compared to other figured woods.
Is a beech tree hardwood?
Despite having bark so thin and delicate that carving one’s initials in it will permanently scar the tree, Beech is a type of hardwood.
Can i use bona hardwood floor cleaner on wood furniture?
Although it’s designed for natural hardwood floors, you can use Bona Hardwood Floor Cleaner to clean tile, laminate, porcelain, vinyl, and engineered wood. However, I wouldn’t recommend it.
How to transition ceramic tile to hardwood?
The answer to height differences is to use a floor transition strip that ramps up or down from tile flooring to wood flooring. Transition strips, typically made of wood or lightweight aluminum, can easily be cut to length with a regular miter saw or hacksaw.
How to stop squeaky hardwood stairs?
Squeaky stairs are easy to fix from underneath—provided they’re exposed. A simple fix is to tap shims into voids between the treads and the stringers and add some glue. Then screw the stringer to each stud. But most stairs are finished on the underside with drywall or plaster.
How much did your hardwood floors cost?
Installing hardwood flooring averages between $6 and $12 per square foot. On average, wood flooring costs between $3 and $7 per square foot for materials and $3 to $5 per square foot for labor. An estimate for installation of 1000 square feet of hardwood flooring runs between $6,000 and $12,000.
Is mountain ash a hardwood?
Mountain ash is a large Australian hardwood that can be used for timber framing, flooring, internal applications and furniture. A very large Australian hardwood, and the tallest of the eucalypts, mountain ash is from the mountain regions of Tasmania and eastern Victoria.
How to remove laminate tile glue from hardwood?
Hold the heat gun or clothes iron a few inches away from each section until the adhesive softens. Never touch the gun or iron to the adhesive. Use a floor scraper to remove softened adhesive. Push the floor scraper across the softened section in short strokes to get the adhesive up.
Is koa wood a hardwood?
Koa wood is known for its deep rich colors and varied grain patterns. Old-growth trees contain the most figured lumber. The grain is interlocked, which often causes curly figuring. Koa is a hardwood and has high crush resistance and shock absorbance.
What direction should hardwood floors run?
Wood floors should always be laid perpendicular to floor joists—across rather that in between them. This will make the floors structurally sound and will help prevent the planks from separating, sagging or buckling. So, there is no right or wrong way to lay your wood flooring.
How to remove nail polish remover stain from hardwood floor?
Lay the material over the nail polish stain, and let it set there for a few minutes before gently scrubbing out the polish (you shouldn’t have to use too much elbow grease). Rubbing alcohol can remove most layers of nail polish with ease.
Is it safe to use mineral spirits on hardwood floors?
As a solvent, mineral spirits work to cut through stubborn grime and buildup from polish, wax, and oils. … Though relatively potent, mineral spirits do not cause any damage to clear wood finishes and are therefore at least worth experimenting with. You may be pleasantly surprised by the results.
Can you vacuum a hardwood floor?
Any vacuum can clean hardwood floors—this is the simplest possible task for a vacuum cleaner. You don’t need anything special to get dust, hair, crumbs, or anything else off your wood, tile, or laminate floors.
How much to charge for remove carpet and install hardwood?
Labor rates total $4.25 to $9.25 per square foot to remove the old carpet and replace it with hardwood flooring. Adding on to your cost to install hardwood flooring is another $3 to $14 per square foot for the wood too.