How high should my baseboard be with an 11 ceiling? Here is a great rule of thumb: A standard 8-foot wall typically has a baseboard 3 to 5 inches tall, while a 10-foot ceiling calls for 5 to 7 inches.
How tall should your baseboards be? A general rule of thumb for your baseboards is the 7 percent rule — they should equal 7 percent of the overall height of your room. So, if you have 8-foot ceilings, your baseboards will look best at around 7 inches high.
What is the most popular baseboard height? If the baseboard is too tall for the room, it will not provide the balance needed to make the room visually appealing. Instead, it will appear to close the walls of the room up, as the distance from the baseboard to the ceiling is too minimal.
Can baseboard be too tall? A baseboard height that’s approximately 7% of the wall height provides for a solid and definable base without being too big. The overall proportion of baseboard to wall height will be comfortable and pleasing. So in a room with a 9 foot high ceiling, a baseboard that’s about 8 inches tall works.
How high should my baseboard be with an 11 ceiling? – Related Questions
Is it safe to leave a ceiling fan on?
You can leave a fan running continuously for eight hours, on average, without worrying about unexpected ceiling damage or fires in your home. … If you want to safely use a ceiling fan for an extended period of time, it’s in your best interest to invest in regular ceiling fan maintenance.
Which is the best ceiling insulation?
Fiberglass, cotton, and mineral wool can all work as loose-fill material, but the far and away top choice for blown-in insulation is fiberglass. Contrary to batts insulation, blown-in fiberglass insulation is perfect for filling in tight voids around wiring, pipes, or any area with awkward framing.
How should fans rotate in high ceiling?
The ceiling fan direction in summer should be counterclockwise to help create a downdraft, which creates that direct, cooling breeze. Your fan direction in winter needs to be clockwise to create an updraft and circulate warm air around the room.
Do ceiling fans on high fall?
A ceiling fan that breaks free from its ceiling mount can be deadly. … Wobbling will not cause the fan to fall, and there have been no such reports. Wobbling can, however, cause light fixture covers or shades to loosen and potentially fall. These items should be securely attached, with all screws tightly set in place.
Can you remove a ceiling fan down rod?
Unscrew the ceiling housing from the old fan and slide it down the rod, out of the way. Remove the rod from the ceiling mount. A typical drop rod has a cotter pin that is removed from a small pin that runs though the rod and the mount. After removing the cotter pin with the pliers, slide the mounting pin out.
Can you paint a brass ceiling fan?
Clean the fan blades, arms, and the brass bottom cover well with a damp rag and some multi-purpose spray cleaner if necessary. Take the metal arms and the bottom plate outside to spray paint. Lay them on a tarp or drop cloth. Spray one to two coats of KILZ primer onto the fan parts.
Should ceiling and trim be same color?
Painting the ceiling the same color as the trim and walls is our favorite option. … Using one color on all the walls, trim, and ceiling creates more of a modern open look. Using the same color throughout is also much easier when painting vaulted ceilings.
Is a smoke detector required above ceilings?
Joshua Greene: Smoke detectors are required above suspended ceilings when a total coverage smoke detection system is required by the code. This is typically limited in today’s code environment, as total coverage smoke detection is usually not required in buildings that have sprinkler protection.
How to install tin ceiling panels?
Place a wood scrap behind the panel and drill a ⅜-inch starting hole for the tin snips. Cut along the line, then make ¼-inch relief cuts along the cutout edge. Install the panel over the fixture opening and bend the metal inside the plywood. Continue installing full panels until you get close to the wall.
How to reprogram ceiling fan remote?
Turn the power to your fan off for 5-10 seconds and then back on using the wall switch. Quickly press the ‘PAIR’ button on the back of the remote control. This step should be done within three minutes of restoring power to the fan. Your fan should turn on low speed indicating the pairing was successful.
How far from the ceiling should drapes be hung?
No matter what the ceiling height, the minimum distance from the top of the window casing to the curtain rod is two inches. To create the illusion of height, mount the drapery rods close to the ceiling. This is particularly important to do if the room has low ceilings. Use these same rules when the windows are arched.
How many rpm ceiling fan?
Customers looking at fan speed should check the fans RPM (Rotations per minute of the blades). The standard 1200 mm (48) fan, runs at 300/350 RPM while the Hi-Speed fan runs at 380/390 RPM or so. Ideally, a ceiling fan should be about 7-9 feet off the ground.
Why do people install drop ceiling?
Modern dropped ceilings were initially created to hide the building infrastructure, including piping, wiring, and/or ductwork, by creating a plenum space above the dropped ceiling, while allowing access for repairs and inspections. Drop ceilings may also be used to hide problems, such as structural damage.
How to get water stains off ceiling tiles?
Grab a ladder or step stool and don your safety glasses, and spray the effected tiles with a 50/50 solution of bleach and water. Wait 30 minutes or until the tile is dry, and repeat until the stain disappears. You can also apply the solution with a paint roller.
How to determine ceiling fan airflow?
A: Airflow quantifies the amount of air a ceiling fan delivers and is measured in CFM which stands for cubic feet per minute. CFM measurements are taken when a fan is on high speed, then that number is divided by the watts used. This means that the higher the CFM, the more efficient the fan, and the more air it moves.
How do i get mold off my bathroom ceiling?
To clean mold from the ceiling, wash the affected area with a store-bought mold cleaner, or a mixture of dish soap and water. Let the area dry. Now it’s time to get out the big guns to kill the mold—bleach. Mix one-quarter cup of bleach with one quart of water and apply the solution with a spray bottle or sponge.
Why is mold growing on my ceiling?
Mould appears on ceilings due to dampness caused by roof damage and leak, high humidity levels, bad ventilation, cooking, condensation, etc. Once it appears, mould will spread fast, actually way faster than it would outdoors. … The different types of mould can have a different impact on our health.
Are ceiling spiders harmless?
If you see spiders crawling up walls or ceilings erratically, they’re probably hunting spiders. They aren’t dangerous to you, although they might freak you out. Web-building spiders are more common in houses, though ironically you may be less likely to spot them.
What does the glass ceiling refer to in labor relations?
The glass ceiling is a colloquial term for the social barrier preventing women from being promoted to top jobs in management. The term has been broadened to include discrimination against minorities. … Women make up 55.9% of the labor force in the U.S but hold only 29.9% of executive positions.
Should you install drywall first on ceiling or walls?
Hang drywall on the ceiling first, then the walls. Check the ceiling for bowed joists using a 4-ft. level.
When did high ceilings come out?
The majority of multi-storey houses built before World War II have ceilings higher than nowadays. Today, the standard is about 2.4m, but in the 19th century or the first half of the 20th century it was commonly about 3m high.