How much should it cost to replace a concrete driveway? Most concrete driveway installation costs between $1,800 and $6,000 or $4 to $15 per square foot. The average is just above $3,000 or $6 per square foot. Factors like location, size, decorative elements, potential reinforcement and removing the existing surface can all influence that range.
How do you estimate a concrete driveway? Multiply the square footage by the depth in feet to find the volume in cubic feet. You can find volume by measuring length × width × depth. Finally, divide the cubic footage by 27 to find the volume in cubic yards. This is the amount of concrete needed.
Are concrete countertops more expensive than granite? Generally, concrete countertops are not cheaper than granite. Concrete starts at around $65 per square foot, while basic granite can be as low as $40 a square foot. Concrete counters are an artisan product that come with higher labor costs.
Do concrete countertops increase home value? In the right house, concrete countertops can improve the house’s resale value since it is considered to be a premium material, on par with quartz or natural stone counters.
How much should it cost to replace a concrete driveway? – Related Questions
How do they break concrete blocks?
The blocks are set to span the long way between two supports and are struck as close to dead center as possible. The blow from the martial artist creates bending stresses in the block. … The crack quickly (instantaneously to the naked eye) propagates through the block and you are left with two pieces.
Do i need a footer concrete floor?
Concrete footings are essential to building a strong, sturdy foundation. A shallow foundation slab will often deteriorate, damaging the structure built on top of it. … Footings are essential to a durable foundation. Most building codes require foundations to have footings.
Why is my concrete dark grey?
The dark gray discoloration is caused by varying degrees of hydration of the cement in the concrete, caused by the varying moisture contents in the localized areas of the total concrete. … The resulting color of the surface is very dependent on the amount of moisture and the curing/drying conditions of the slab.
Do you need to put expansion joints in concrete?
All concrete will shrink slightly as it dries and, when it’s set, will expand or contract depending on the ambient temperature. To prevent cracks from forming, concrete expansion joints should be incorporated to allow for movement, particularly in slabs with a surface area exceeding 6m2.
Can pour concrete in rain?
Pouring concrete in the rain can compromise its strength, increasing the tendency for dusting and scaling to develop. Once the damage is done, it can be hard to rectify and will often ruin the appearance of the finished surface. Don’t let it rain on your parade.
How much does a concrete foundation cost per square foot?
Concrete costs between $4.25 and $6.25 per square foot and the average size of a house is about 2,000 square feet. That can mean between $8,500 and $12,500 for concrete alone. Labor typically costs around $2.60 per square foot, which is about $5,200 for a 2,000-square foot house.
Is christ in concrete an autobiography?
Largely autobiographical, Christ in Concrete opens with the dramatic Good Friday collapse of a building under construction, crucifying in concrete an Italian construction worker, whose death leaves his pregnant wife and eight children impoverished.
Can i use piece of wood for concrete float?
Wood floats are made of hardwood (mahogany or teak, for example) to resist wear and warping. … Wood floats rough up the surface of concrete more than does magnesium, almost forcing moisture to the surface while opening the surface up (or increasing porosity) for surface applications of color, hardener, etc.
Should i pack concrete?
Wood floats are made of hardwood (mahogany or teak, for example) to resist wear and warping. … Wood floats rough up the surface of concrete more than does magnesium, almost forcing moisture to the surface while opening the surface up (or increasing porosity) for surface applications of color, hardener, etc.
How to mount things on concrete walls?
There are 3 go-to methods of hanging picture frames and art on a concrete wall. Depending on the weight and size of your objects, you can use Adhesive Wall Hooks, Hardwall Hangers, and Masonry Screws.
How to clean peanut oil off concrete?
Cover the fresh spill with baking soda, talcum powder or dry dish detergent. Slowly pour liquid laundry detergent over the affected area, and let the mixture sit for half an hour. Pour hot water over the cooking oil spill and concrete. Scrub hard with a stiff brush for several minutes.
Is it okay to power wash concrete?
The quick answer is yes, power washing can degrade a concrete surface. You can notice visible damage from water pressure at the level at which even light-duty power washers can operate. Therefore, if you aren’t careful, you can cause irreversible damage to your driveway or patio.
Do i need to reinforce my concrete slab?
Do All Concrete Projects Need Reinforcement? No, they do not. Larger projects or slabs may need steel reinforcement to provide support or extra strength. Wired mesh can also help resist cracking.
How to remove mold from concrete patio?
The best solution is to scrub and clean the affected areas with a mold-killing detergent, like RMR-86 Instant Mold & Mildew Stain Remover, or a simple solution of household bleach and water. Be sure to scrub aggressively to get down into the pores of the concrete.
Which is stronger mortar or concrete?
Basically concrete is stronger and more durable so it can be used for structural projects such as setting posts whereas mortar is used as a bonding agent for bricks, stones, etc. … Concrete has a low water-to-cement ratio and is a thinner consistency than mortar.
How thick to make concrete stepping stones?
For durability, concrete stepping stones should be 1 ½” to 2 ½” thick. However, you will need to make sure the mix you use can cast to a thickness between those two numbers. Most mixes will support casting to a thickness of 1 ½”, but 2” is better.
How to cut concrete patio stones?
There are a few ways to split bricks, patio blocks or pavers — with a drilling hammer and a masonry chisel or using a power saw. The chisel and hammer method is useful if you just have a few cuts to make. For a larger project or more accurate cuts, a circular saw with a concrete blade is a good option.
Can you put polished concrete over floorboards?
Our overlay system can be laid over wooden floorboards and other floor surfaces without more traditional preparation methods and major upheaval during the installation process.
How do they color stamped concrete?
Most stamped concrete is colored with pigments that are either added to the mix (integral color) or surface applied (shake-on color hardener). While both are good methods of coloring concrete, color hardener provides greater color selection and enhances the strength and durability of the concrete surface.
Should i wet my new concrete driveway?
ANSWER: Keeping concrete moist helps the curing process. … If too much water is lost from the concrete through evaporation, the hardening process slows down or ceases. Concrete continues to gain strength after pouring for as long as it retains moisture, but the longer it moist-cures, the slower the rate of strength gain.
Is sitting on concrete bad for you?
The cement causes many issues: it is highly toxic, prompting eye, skin and respiratory tract irritation, and contains calcium oxide, corrosive to human tissue, and chromium, which can prompt severe allergic reactions.