How much to replace driveway concrete? Most concrete driveway installation costs between $1,800 and $6,000 or $4 to $15 per square foot. The average is just above $3,000 or $6 per square foot. Factors like location, size, decorative elements, potential reinforcement and removing the existing surface can all influence that range.
How much will my concrete driveway cost? A concrete driveway costs from $8 to $18 per square foot, depending on decorative colors and finishes. While a plain gray concrete driveway costs between $5 and $7 per square foot to install. Concrete is ideal for getting the look of stone or pavers, without the high cost.
Is it cheaper to pave or concrete a driveway? 1. Cost. The cost of an asphalt driveway is typically cheaper than concrete, costing $2.00 – $4.00 per square foot. … In contrast, a concrete driveway costs between $4.00 – $6.00 per square foot for a standard installation.
Do I need footing for ground level deck? If you want to expand your outdoor living space, a ground level deck might be your best option. Since it’s not connected to a house, it can go anywhere in your yard and doesn’t require deep footings. Because it rises just inches above ground, it doesn’t need stairs or railings.
How much to replace driveway concrete? – Related Questions
Can you bleach cured concrete patio?
After you have removed everything from the patio, mix a solution of one part chlorine bleach to two parts water in a plastic bucket or spray bottle. You will need to protect the lawn and shrubbery from the solution with old towels or plastic sheeting.
Can you pour concrete around pvc pipe?
NO. you should never pour concrete on any pvc conduit or water pipes unless you wrap the pipes with a form wrap to allow expansion and contraction and any penetration thru the concrete or install a 4in or 6in sleeve under the slab to pass the pipes though.
Can i sponge concrete?
Any drab gray concrete floor can take on an attractive new look with a faux-finishing paint technique called “sponging.” Sponging a concrete floor takes a little preparation and more manual labor than simply painting the floor. Turn a drab concrete floor into a beautiful surface with sponge-painting.
Why add foam to concrete?
The addition of preformed foam lowers the density of the mix, increasing the yield. The higher the quantity of foam added, the lighter the resultant material. Two types of foam, wet foam and dry foam, are used in the production of foamed concrete.
How to repair concrete slab leakage?
The first way you can fix a leak is by jack-hammering the concrete slab, digging down to the pipe, and fixing it. The second way is to dig a tunnel through the dirt under the slab from the outside all the way to where the leak is.
When can i drill into new concrete?
You can drill the hole after 24 hours, but it would be better to wait an extra day. In addition, the insert you use to hold anything down will readily break free if you tighten it down, even after 2 days. It would be better to wait a week before any kind of real torquing down of any kind of fasteners.
How does concrete lifting work?
This process typically requires holes between 1″ and 2″ in diameter. This “mud” is injected under the concrete slabs, oftentimes using a movable pump that can access most slabs. Once the void under the slab is filled, the pressure builds under the slab, lifting the concrete back into place.
How to make lightweight concrete blocks?
The method for making lightweight cement blocks comprises mixing three parts by volume sawdust with water to form a first mixture having a relative moisture content in the range of 40% to 44%, preferably 42%, adding one part by volume sand to the first mixture to form a second mixture, mixing the second mixture with …
Is concrete good for fire pits?
Concrete is made up entirely of non-combustible materials, this lack of flammability makes it the perfect base for a fire pit. What concrete will do is expand when exposed to high temperatures, this could potentially cause cracking.
When can i drive on concrete driveway?
Your new concrete is designed to reach 90% of its full strength potential after 7 days, so feel free to drive your personal vehicle on it then. It will take additional time before you can drive or park heavy equipment or machinery on your newly poured concrete, so make sure to wait at least 30 days.
How to get slime off concrete?
Mix 2/3 cup white vinegar with 1/3 water in a spray bottle. Spray the cleaner on the slime and let it soak in. Use a scrub brush to work the cleaner in to soften and break down the slime. Blot with a white cloth to remove excess liquid and repeat as needed.
How many layers of concrete sealer can be applied?
Concrete sealers are best applied in two thin coats. The first coat of sealer acts like a primer. Most of it will disappear into the concrete surface, and the concrete will probably look fairly unattractive after the first coat.
How many coats of sealer on stamped concrete?
Concrete sealers are best applied in two thin coats. The first coat of sealer acts like a primer. Most of it will disappear into the concrete surface, and the concrete will probably look fairly unattractive after the first coat. The second thin coat will provide an even finish, color enhancement and gloss.
What type of hammer to use with concrete chisel?
For a cold chisel, you’d use a sledgehammer made of forged steelhead or a machinist’s hammer [1]. For masonry chisels, a power hammer (rotary) is commonly used.
Can you pour concrete on an asphalt road?
Yes, you can pour concrete over an asphalt driveway. While asphalt provides a poor bond with concrete, it does serve as an excellent base as it is solid, stable, and very strong. Provided the asphalt is in decent condition, there is no reason you can’t pour concrete over the top.
How do you remove wd40 from concrete?
Use a strong detergent to remove as much oil from the stain as you can. Either use it straight from the container or mix it with some water. Pour it on the stain and scrub it in with a bristle brush. Do not use a wire brush since the wires can damage the concrete surface.
How much will an 80 pound bag of concrete cover?
80 lb bag of concrete yields 0.60 cubic feet which is approximately around 0.0222 cubic yards that will cover around 3.6 sq ft area up to standard depth of 2 inch excavation or backfills, and for 1 cubic feet of landfill you will need 1.66 bags of 80 lb concrete.
How long concrete post set?
Typically, you can apply some weight to the posts after 4 hours, but it’s a good idea to wait at least 24 hours before resuming fence construction. Standard concrete mixes may take up to two hours to set and should cure for 24 to 48 hours before any forces are applied to the posts.
Can baking soda damage concrete?
It’s highly alkaline, so it won’t destroy your concrete, but it could irritate your skin and even cause burns. … When cleaning concrete, avoid using harsh chemicals, especially acid-based cleaners, as they might harm the surface. Instead, gentle cleaning agents like baking soda, dish soap, and water should be used.