concrete23

How to clean old concrete?

How to clean old concrete? White vinegar and a little scrubbing with a brush is a very effective, eco-friendly way to remove rust stains from concrete—even those that are decades old. Pour the white vinegar directly onto the stain, allow the liquid to penetrate the area for 20 minutes, and scrub with a stiff-bristled brush.

Can you put tents on concrete? The answer is yes, but there are some requirements. Here is some info about how tents typically get setup on cement. First off, the type of tent best fit for this setup is a FRAME TENT (versus a POLE TENT). These are tents that can stand up on their own without the use of ropes / stakes.

How much weight do you need to hold down a 10×10 canopy? Determining how much weight you’ll need for your canopy tent is very simple. American Tent manufacturers recommend 40 lbs at each tent leg for a small, 10×10 tent. Anything larger than that and the number doubles. Simple!

How does a power trowel ride work? In the case of ride-on trowel machine, as the name depicts, it is operated by riding atop of it. The troweling blade is installed below the operator’s chair. While in the case of the walk-behind trowel, the operator walks behind the troweling blade and steers it by applying force through the hands.

How to clean old concrete? – Related Questions

What key limitation do children have in the concrete operational?

Children at this age are egocentric, which means they have difficulty thinking outside of their own viewpoints. The main achievement of this stage is being able to attach meaning to objects with language. It’s thinking about things symbolically.

How much to pour concrete around pool?

The average cost of stamped concrete around an inground swimming pool is $9–$13 per square foot (depending on region). The average size of a stamped concrete pool patio in most areas is 500–900 square feet.

What is slump test for concrete?

A concrete slump test measures the consistency of a concrete batch to see how easily the concrete will flow. The test not only observes consistency between batches, but it also identifies defects in a mix, giving the operator a chance to amend the mix before it is poured on site.

How far apart is rebar placed in concrete?

Place rebar in a grid pattern with a spacing between bars of approximately 12 inches. In either case, blocks should be used under the reinforcement to keep centered within the concrete. Synthetic fibers have also proven to be beneficial in driveways as a way to reduce shrinkage cracks.

How soon can you walk on concrete?

Please keep vehicles, children, pets, and yourself off of your newly poured concrete for the next 24 hours. After 24 hours, you can walk on your newly poured concrete, but avoid dragging your feet, ‘doing the twist’, or allowing your pets to walk on it as their claws can scuff the concrete.

How thin can a concrete floor be?

When it comes to how thin concrete flooring can be, two to three inches is about the thinnest you can go. If your concrete is on the thinner side, you will have to make sure it is crack and imperfection-free, so it won’t become a safety issue once heavy furniture and decor go on top of it.

Where do you find concrete in fallout 4?

Locations. Concrete can be found throughout the wasteland in the form of a bags of cement. Another method of obtaining concrete is through scrapping broken down houses or cinder blocks. There are several cinder blocks littered in front of and to the right of the shack at Tenpines Bluff.

How to clean cooking grease off concrete?

Cover the fresh spill with baking soda, talcum powder or dry dish detergent. Slowly pour liquid laundry detergent over the affected area, and let the mixture sit for half an hour. Pour hot water over the cooking oil spill and concrete. Scrub hard with a stiff brush for several minutes.

How to clean pollen stains from concrete?

Try regular dish soap or even some car wash soap diluted in water….just scrub it with a brush then power wash it off. I probably wouldnt use muriatic acid on it because it can take the sealer off and stain the color in the concrete.

When to resurface concrete pool?

A concrete (gunite) pool lasts 10–15 years before it needs to be resurfaced. In addition to redoing the interior finish, you’ll usually need to replace the waterline tile at the same time.

Can you use a wifi extender concrete?

According to our experts, After testing the NETGEAR WiFi Mesh Range Extender EX6150 for a week, they found that it is a great device that can easily penetrate through the concrete wall. The 1200 Mbps speed and signal strength is excellent, and it can easily cover up to 1200 sq. ft.

How to test concrete floor for moisture?

This test involves taping an 18” x 18” polyethylene sheet to a concrete surface and then waiting at least 16 hours. Visible condensation on the sheet or darkening of the concrete indicates excessive moisture. Any coating applied to the surface may be at risk of failure.

What cleans black mold off concrete walls?

The best way to remove mold from concrete is to apply a bleach solution, laundry detergent, and water to the affected area, scrub it with a brush, and rinse it clean with a sponge indoors, or hose or power washer if outside.

When to polish concrete?

(This should be done roughly 30 days after concrete placement and after the HVAC system has been operating for a minimum of 14 days.)

Can concrete be piured on clay?

The feasibility of building with earth in the same and simple way as cement-based concrete has been demonstrated as an environmental-friendly alternative.

How to fill gap between two concrete slabs?

Dig a 4-inch wide trench along the sides of the slabs from the crack or gap closest to the house all the way down to the street or sidewalk. This trench should be a deep as the slabs are thick. Fill the trenches on either side of the driveway with small, rounded pea gravel (the size of marbles or peas).

What can remove concrete stain off of concrete driveway?

One of the most budget-friendly ways to spot-treat stains is with liquid laundry detergent and water. Target the area by pouring the soap directly onto the stain; use a stiff nylon brush to scrub the area (avoid wire-bristle brushes as metal can scratch concrete), rinse with water and allow to dry.

What concrete mix to use for shower floor?

According to StructX, the recommended ratio for flooring is 3:1 (parts sand to parts Portland cement). Too much cement can cause clumping and make the mixture difficult to spread, while too much sand can create a weak mortar. Mix 3 parts dry sand to 1 part Portland cement together before adding water.

Can you use paint thinner on stained concrete?

Application. To use paint thinner on concrete, simply pour the product over any visible stains, completely saturating the affected area. Sprinkle an absorbent material, such as kitty litter, cornmeal or talcum powder, over the paint thinner. Wait 24 hours and then sweep the concrete.

Leave a Comment

Your email address will not be published.