How to hang curtains with baseboard heaters? When hanging curtains in front of baseboard heaters, the curtains should fall 1″ from the floor and hang 2-3″ from the edge of the heater.
Can you hang curtains near baseboard heaters? Keep drapes and curtains at least 8-10″ above electric baseboards, and/or at least 3″ in front of them with 1″ floor clearance (to allow air to circulate). Don’t locate curtains or drapes directly over or in front of electric heaters.
How far should curtains be from electric baseboard heaters? The bottom of your drapes should end at least 10 centimetres (four inches) above your heaters or, if your drapes run floor-to-ceiling, at least three centimetres above the floor. Make sure you have at least five centimetres (two inches) between the back of the drapes and the front of your heaters.
How do you hang curtains on a hot water baseboard heater? In forced hot-water baseboard heaters, hot water in the baseboard unit heats the incoming air. Slide the curtains onto you curtain rod, and install the rod into the brackets at the top of your window — or at the ceiling, if the brackets are there.
How to hang curtains with baseboard heaters? – Related Questions
How to clean mold shower curtain?
Spray a solution of two parts hydrogen peroxide and one part water onto the shower curtain. Let the hydrogen peroxide sit for five to ten minutes. Rinse thoroughly. Use a baking soda paste and scrub the mold until it’s gone.
How to measure shower curtain length?
Simply take a tape measure and measure the entire length of the shower space from wall to wall. Then, add 12 inches to ensure the curtain will be able to move freely and still reach both walls to provide ample coverage.
Should curtains go to floor?
So should curtains touch the floor? The short answer is yes… usually. But when making any decision about your window treatments, whether they’re drapes, blinds, or shades, it’s important to consider every aspect of style and function so you can choose the best option for your windows and your home.
Can i put curtains over block glass?
You can use certain traditional window coverings and hardware on glass block windows. Lightweight curtains filter light and offer privacy. Hang curtains on a ceiling-mounted curtain rod just far enough out so that they don’t touch the glass, causing it to sweat.
How long should curtain rod for standard window?
Additionally, be sure to choose a curtain rod that’s wider than your window. This allows curtains to be pulled completely to the side of the window and gives the appearance of a larger space. The rod itself should be 8 to 12 inches longer than the width of the window, which allows for 4 to 6 inches on either side.
How do curtains reduce heat loss?
Blockout curtains help reduce heat loss by acting as a thick barrier between the room and the window. Air tends to escape through the path of least resistance. Since warmer air seeks the cooler temperature, the heated air inside your home will try to flow through the cracks in the window seams.
How to remove mildew smell from curtains?
Mix one part water and one part white vinegar in a spray bottle. Shake to allow the ingredients to blend properly. Spritz the mixture onto the fabric and let it evaporate naturally. The vinegar will evaporate fast, taking with it both its own sharp scent and the mold smell.
How to install metal curtain tie backs?
Hang each tieback hook a third of the way up from the bottom of the curtain. Buffer three inches from the edge of the window. For example, if your curtain is 84 inches long, you would place the tieback about 28 inches from the bottom. A tieback for a 36-inch long cafe curtain would be placed 12 inches from the bottom.
Can i hang two curtains on one rod?
In window treatment, layering refers to using more than two-panel pairs of curtains to dress your windows. … To achieve this look, slide one panel of the main curtains onto the rod. Move it to the very end to create space for additional panels. After that, add one or two of the sheer panel on to the rod.
How to put heading tape on lined curtains?
At the end of the tape pull the cords out from the tape loops and knot them together. Tuck the excess tape under and place the heading tape approx 0.5cm from the edge of the curtain and 0.25cm to 0.5cm down from the top . Machine along the top of the tape until approx 15cm from the end.
Where should you hang curtain rods?
The higher the curtain rod, the taller the window will appear, so fix your curtain rod closer to the ceiling than the top of your window, if you can. One rule of thumb is that they should sit 4-6 inches above the window frame.
Do i need to install curtain rods into a stud?
Studs are typically spaced 16″ apart so sometimes you cannot always use one. … Well, you do NOT need a stud to hang a curtain rod, but you will need a special type of wall anchor to hold the weight. There are two different types I like to use: a drywall anchor or toggle bolts.
How do you get wrinkles out of thermal curtains?
Shoot a constant stream of steam through your iron or steamer. Glide the iron or steamer slowly down the surface of the curtain lining to the bottom hem; work in a section as wide as the base of the iron or steamer. Do not allow the iron or steamer head to contact the fabric. Hold the fabric taut until it cools.
How to fit curtain holdbacks?
Hang each tieback hook a third of the way up from the bottom of the curtain. Buffer three inches from the edge of the window. For example, if your curtain is 84 inches long, you would place the tieback about 28 inches from the bottom. A tieback for a 36-inch long cafe curtain would be placed 12 inches from the bottom.
How do you fix a shower curtain rod?
To fix the problem, simply set the rod to the correct length, mark it with tape and then drill two holes through both pieces of the rod. Place stainless steel screws in the holes so that they won’t rust. This will lock the rod into position, but once it’s in place there won’t be any reason to adjust it.
How to weight down curtains?
Drapery lead weights for indoor use won’t cut it outdoors. You will need something much heavier to defy the wind. You can put a heavy stainless steel link chain through the bottom hem of the curtains. Alternatively, you can sew or hang heavy fish sinkers and washers at the bottom, as well.
How high to hang a curved shower curtain rod?
The standard shower curtain is 72 inches (183 cm) long, and when it is linked to shower hooks, it usually gains another two inches (five cm). To prevent the curtain from dragging on the floor of the tub, hang the curved shower rod at a height of 74 inches or more.
How to get odor out of curtains?
All you would need to do is pour some diluted vodka in a spray bottle and apply it on the drapes. Then, give it a few minutes before the drapes dry up and you are good to go. Vodka helps eliminate bad odors from curtain smells, carpets, upholstery, and the likes. So this proves to be a cheap yet effective trick!
What material are theatre curtains made from?
Many are made from black or other darkly colored, light-absorbing material (In North America, for example, heavyweight velour is the current industry standard). Theater drapes represent a portion of any production’s soft goods, a category comprising any non-wardrobe, cloth-based element of the stage or scenery.
Can i extend width of curtain?
Decide upon a design for your finished curtain panels. If you need an additional 20 inches of width for each curtain panel, for example, you can add two panels, each 10 inches wide, to the sides of the pre-made panel.
How high to mount shower curtain rod?
A standard shower curtain is typically 72 inches long, so the curtain rod should be installed around 75 to 77 inches from the floor. This height will keep the shower curtain from touching the floor.