What can i clean concrete with mold mildew? One of the most common and effective means of removing black or green mold from concrete is bleach. Bleach will kill mold down to the root, cleaning it off concrete while also preventing it from returning.
How thin can you put self leveling concrete? Concrete typically needs to be a few inches thick but self leveler can be as thin as 1/16 inch. Crack resistant even when poured in thin layers.
How thick should self-leveling cement be? QUIKRETE® Fast-Setting Self-Leveling Floor Resurfacer (No. 1249-51) can be installed from 1-1/2 inch (38 mm) thick to a feather edge, although a ¼ inch (6.3 mm) minimum thickness is required for heavy traffic areas.
How thick should self-leveling underlayment be? It depend on the particular floor leveling product you’re using, but most manufacturers recommend that you apply no more than 1/8” thick coat of self-leveling or floor patch compound at a time.
What can i clean concrete with mold mildew? – Related Questions
How to mount a shelf on concrete wall?
The most effective way to do it correctly is to drill a hole in the wall, insert a sleeve anchor and drive a screw into the sleeve to hold the shelving. You can do this if you’re using floating shelf brackets or you’re installing a shelf unit with a backing that you can attach to the wall.
Is concrete good for acoustics?
Just how soundproof is concrete? Because it acts to reflect and absorb sound waves, concrete is an effective barrier for noise. It is also known for being a durable, long-lasting material for building and civil works projects.
Can you do concrete in the rain?
Pouring concrete in the rain can compromise its strength, increasing the tendency for dusting and scaling to develop. Once the damage is done, it can be hard to rectify and will often ruin the appearance of the finished surface. Don’t let it rain on your parade.
Is concrete patio cheaper than wood deck?
Overall, a concrete patio will generally be cheaper to install compared to a deck. While your specific house and yard set-up may determine which is cheaper for your individual needs, a wood deck is likely to have a better return on investment compared to a concrete patio.
What is the weight of 1 cubic yard of concrete?
A solid slab of concrete weighs 4,050 pounds per cubic yard. A cubic yard of broken up concrete weighs 2,025 pounds.
Is it advisable to treat concrete in the winter?
A solid slab of concrete weighs 4,050 pounds per cubic yard. A cubic yard of broken up concrete weighs 2,025 pounds.
Can you paint a concrete shower base?
An epoxy floor paint is the best option for a concrete shower floor, as it’s durable against both foot traffic and water. Use the same roller and the same center-outward technique. Again, leave adequate drying time. It’s recommended you give your shower several days to dry before using it again.
What to use in concrete expansion joints?
Sikaflex can be used to seal horizontal expansion joints. It’s a great product because it remains permanently flexible, dries quickly, sticks to anything, is self-leveling, and highly resistant to weather conditions. You should apply Sikaflex when the temperature is between 40F-100F.
Can concrete set in the rain?
Surprisingly, yes, you can pour concrete in the rain. Concrete does not dry, it cures. Curing is a chemical reaction and not a physical one, so rainwater won’t kill concrete. Considering concrete can be cast and cured underwater, some rain on your property won’t normally harm a job.
What is euro tile concrete?
Eurotile is a product that consists of acrylic and concrete. It is designed to have the appearance of most any type of surface such as natural stone, flagstone, Mexican tile, or slate. … Eurotile is laid over concrete, making it a practical choice for surfacing the first time around and for remodeling as well.
How do you get stains out of unsealed concrete?
If the stain is dry, moisten it first then cover it with detergent. Allow the detergent to soak into the stain for 45 minutes. Pour boiling water over the detergent after soaking. Scrub thoroughly with a stiff brush to work the majority of the stain out of the unsealed concrete.
How thick should a concrete table top be?
HOW THICK ARE CONCRETE COUNTER- TOPS? Standard thickness is 1 1/2” with a minimum of 1 1/4” and maximum of 3”. Any thickness beyond 3” can be achieved using techniques to give the appear- ance of the desired thickness, yet still maintain weight and size within desirable limits.
Is concrete harder than asphalt?
First, concrete is harder than asphalt (being road). There is going to be less absorption of impact on concrete versus asphalt.
When to be concerned about cracks in poured concrete walls?
First, concrete is harder than asphalt (being road). There is going to be less absorption of impact on concrete versus asphalt.
Can concrete handle heat?
Different constituent components used to prepare concrete, including clay, limestone, gypsum, and the aggregate, make the material impervious to heat and flames. … The slow rate of heat transfer allows concrete to withstand extreme fire pressure without emitting toxic gases, smoke, or molten particles.
How to put in laminate flooring over concrete?
Different constituent components used to prepare concrete, including clay, limestone, gypsum, and the aggregate, make the material impervious to heat and flames. … The slow rate of heat transfer allows concrete to withstand extreme fire pressure without emitting toxic gases, smoke, or molten particles.
How large are pre fabricated concrete panels?
Panel size should be suited to the building design. For instance, for a single-story structure, the panel may be eight to 10-feet tall, and 20 or 30 feet long. For a two-story building, the panel might be 15- to 20-feet tall.
What glues concrete to concrete?
QUIKRETE® Concrete Bonding Adhesive (No. 9902) permanently bonds new concrete, plaster, and stucco to existing concrete, plaster, and stucco. Eliminates the need for roughing the surface before the application.
How to secure wood to concrete floor?
You can use concrete or cut nails, powder-actuated tools (PAT) with appropriate nails, or construction adhesive to secure wood to concrete. The nails should penetrate 3/4″ to 1” into the concrete to hold the wood tight and prevent lateral movement.
How to smooth brushed concrete?
There are two things you can do fix the rough finish. One is, you could grind or polish the surface which would remove the rough broom finish and smooth the surface of the concrete. Some of the aggregate would be exposed giving you a nice smooth decorative look to your sidewalk and patio.