What is the best concrete for fence posts? For a small to mid sized job I recommend going with premixed. The best concrete mix for fence posts I’ve found is Quikrete Fast Setting Concrete Mix in a 50 lb bag. It’s 4000 psi, easy to work with, sets up fast, and doesn’t need to be mixed. Just pour it in the hole and soak with water.
Should I use fast setting concrete for fence posts? Quikrete Fast-Setting Concrete Mix is easy to use — just add water — and it sets in 20 to 40 minutes. It’s the most efficient option for setting posts for things like mailboxes, fences and lamps. … Best of all, you can hang fence and other heavy loads on a post set with fast-setting concrete in just four hours.
How many bags of quikrete do I need for a fence post? When you account for the fence post what you need is 4 bags. The best way to determine the size of each fence post hole is: The diameter of the hole is 3 times the width of the fence post. The depth of the hole is 1/3 to 1/2 the above ground height of the fence post.
How deep should concrete be for fence posts? The depth of the hole should be 1/3-1/2 the post height above ground (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet). Add about 6 inches of QUIKRETE All-Purpose Gravel into the bottom of the hole.
What is the best concrete for fence posts? – Related Questions
How heavy sledge hammer to break concrete?
A sledge can be surprisingly effective in breaking up concrete up to about 4-in. thick. Give it a try first, before moving on to heavier rental equipment.
Is it ok to have concrete floor in shower?
Concrete flooring works well in bathrooms for the same reasons that ceramic tile is so ideal for the same space—it’s easy to clean and it can’t be damaged by water. … Concrete can be cold, and it can be slippery if it has the wrong type of finish or surface treatment.
What do i need to make a concrete countertop?
Concrete flooring works well in bathrooms for the same reasons that ceramic tile is so ideal for the same space—it’s easy to clean and it can’t be damaged by water. … Concrete can be cold, and it can be slippery if it has the wrong type of finish or surface treatment.
What water pressure is needed to strip paint from concrete?
For the best results, use a power washer with a pressure rating of at least 3000 psi and a flow rate of at least 4 gallons per minute.
How do i repair a concrete statue?
Apply the epoxy to the cement statue cracks or chips by squeezing it on, or applying it with a putty knife if it is in a tub. To reattach part of the statue, apply a 1/4-inch layer of epoxy to both the broken piece and the statue and press them together for two to three minutes.
How to stabilize concrete slab?
Repair methods and solutionsCommon ways to repair a slab are to surface fill or inject with epoxy or polyurethane. Filling and bonding the slab back together with a high strength epoxy is a great way to seal the crack.
What is the best ice melt safe for concrete?
Hopefully, now you can understand that calcium chloride is an ice melt safe for concrete. It has a much lower risk of intensifying the freeze-thaw cycle like rock salt since it can work at much lower temperatures.
How do you remove tire marks from a concrete driveway?
Apply a cleaning product such as SunSpot, a concrete degreaser, Natural Orange (or other citrus cleaner), Simple Green, or automotive brake cleaner to the affected area. Allow the cleaner to sit on the surface for a few minutes. Scrub the spot with a brush with stiff bristles.
Why not store battery on concrete floor?
So, it’s OK to set or store your battery on concrete.” … Placed on a potentially damp surface such as concrete, the moisture could cause the wood to swell and shift, and the glass cells to break, damaging the battery.
How much is a precast concrete bollard?
So, it’s OK to set or store your battery on concrete.” … Placed on a potentially damp surface such as concrete, the moisture could cause the wood to swell and shift, and the glass cells to break, damaging the battery.
Can a crawl space have a poured concrete floor?
“As long as there are stable soils, and if it’s poured properly, it should be fine. The problem is that in retrofit jobs, often you have very limited space and it’s just hard to work in, and that affects being able to pour the concrete right. Also, if the soil is contaminated, you’ll need a liner.
What is the best oil stain remover for concrete?
WD-40 is an effective grease stain remover. In some cases, WD-40 can remove oil stains from concrete.
What temp is too cold to pour concrete?
Experts agree—the best temperature to pour concrete is between 40° – 60°F. When temperatures dip below 40°F, the chemical reactions that strengthen concrete slow down and can lead to weaker concrete.
Should i mount my tv on a concrete wall?
Concrete is the most common building material for exterior walls and load-bearing partitions. A flat screen TV stand can be attached to a good quality concrete wall using a nylon plug or concrete screw. The original NAT nylon plugs or Gripper all wall plugs are a safe and durable choice.
How much is a yard of concrete in nc?
Use $90 per cubic yard as a ballpark figure for concrete prices, but concrete slab cost will vary by region. Also, expect a fee of about $60 per load for delivery from a concrete truck for concrete cost.
How strong is 3000 psi concrete?
3,000 PSI. The residential workhorse of concrete, 3,000 PSI can be used for driveways, patios and sidewalks. Its durability will help shrug off the freeze-thaw cycle of harsh winters. This is a fine choice for any general construction use.
What is the purpose of aggregate in concrete?
Aggregate materials help to make concrete mixes more compact. They also decrease the consumption of cement and water and contribute to the mechanical strength of the concrete, making them an indispensable ingredient in the construction and maintenance of rigid structures.
What size concrete column do i need?
Columns should have minimum dimensions of 8″ x 8″ and may be formed by formwork on four sides or formwork on two sides with blockwork on the other two. The minimum column reinforcement should be 4- ½ diameter bars with ¼” stirrups at 6″ centres.
What to use to paint concrete steps?
Masonry paint, also called elastomeric paint, is a good choice for concrete steps because it contains binders that contract and expand with the concrete. Other types of paint can crack and peel on concrete. Make sure the concrete is very dry before you paint.
How to break concrete footings?
Break the concrete footing into two or more sections, using a cold chisel and steel mallet. Drive the tip of the chisel into the seam between the base of the post and top of the concrete until the concrete breaks. Repeat this on the opposite side of the post.
Can you attach wood decking to concrete?
Instead, consider covering your ageing concrete patio with decking. Select from a variety of materials including treated lumber such as pine or cedar or lower-maintenance products like composite decking or PVC. Start by securing two-by-four runners, or sleepers, to the concrete, then attach decking to the runners.