Where should you place a curved shower curtain rod? Depending upon tub model, mount rod between 6″ and 8″ from center line of the tub. The middle portion of the rod should curve just outside the contour of the tub. Review the Curved Shower Rod Mounting Instructions above to determine proper rod placement.
How high should you hang a curved shower rod? The standard shower curtain is 72 inches (183 cm) long, and when it is linked to shower hooks, it usually gains another two inches (five cm). To prevent the curtain from dragging on the floor of the tub, hang the curved shower rod at a height of 74 inches or more.
Where should shower curtain rod brackets be placed? The shower curtain rod does not mount to these walls in most cases. It mounts to the bathroom wall, about 1 inch above this sidewall. The mounting brackets screw into place in the bathroom wall’s drywall. If you drill into the tub sidewalls, which are made of fiberglass, you ruin the watertight nature of the tub walls.
Are curved shower rods better? A curved shower rod will allow you to enjoy up to 33% more room than using a straight rod. This is because of the outward bulging design that makes it curve in more space from the bathroom into the shower area. You can always enjoy free movements inside the shower without worrying about staining the linen with foam.
Where should you place a curved shower curtain rod? – Related Questions
How to determine length of ruffle for curtain?
Multiply the width of the curtain panel by 2 and add the length of the curtain. Double this measurement to determine the ruffled trim yardage needed.
Can you use fabric shower curtain without liner?
While it’s certainly possible for fabric shower curtains to go without a liner, it is not recommended. Since fabric curtains can retain a lot more water, you’ll want to add a liner to protect it and provide additional privacy.
How to hold curtain panels together?
If you’re in a pinch, you can use curtain panel connectors or clips to hold curtain panels together. Hanging curtains with drapery hooks is also a possibility.
Can you tumble dry polyester curtains?
Use a mild laundry soap that’s free of brightening ingredients or bleach, which can affect the color of polyester fabric. For delicate or embellished panels, hand-washing is a safer alternative. If indicated on the tag, tumble-dry on low heat. Otherwise, hang your curtains to dry.
Are plastic shower curtains recyclable?
Most plastic shower curtains or plastic shower curtain liners are made of PVC (polyvinyl chloride), also known as plastic #3, which is generally not recyclable in municipal recycling systems. … Do not treat plastic shower curtains like film plastic and try to recycle them at a store drop-off location.
How high curtain bracket mounted?
Each bracket should be placed at the height you previously determined and about four to six inches from the side of the window frame. (This will allow you to open the curtains completely.)
Where to donate old curtains?
Linens: Goodwill and Salvation Army thrift stores accept towels, sheets, curtains, and such. To donate well-worn towels, call your local animal shelter.
How to pick a cafe curtain?
So, you’ll need to measure the length from the curtain rod to the window sill. If there is no window sill, then cafe curtains can hang around fifteen centimeters (six inches) below the window. If there is a window sill present, then cafe curtains should hang just above the sill.
How to make curtains work on traverse rod?
To affix the curtain to the traverse rod, you will need to connect the clips to the curtain pins. Typically, these pins are already attached to the curtain, but if they are not, you can purchase separate pins and then use them to attach the curtain to the traverse rod.
How far to extend curtain rod past door frame?
As a general rule, drapes will be open during the day, so make sure the curtain rod extends at least four inches on each side of the window’s inside frame. To create the illusion of a wider window, extend the rod up to 10 inches beyond the window’s frame.
How long should a curtain pelmet be?
We would recommend that the depth of the pelmet track (B) should be at least 10cm deep. We recommend 15cm. This is to ensure that when the curtains are drawn back, they do not push against the pelmet. Pelmet boards can be supported simply, by using right angled brackets along the length.
How to tie up curtains that are too long?
Install a tieback and blouse the excess curtain over the tie creating a swagged effect. If you have lots of excess curtain, install two tiebacks on each side and create a double swag. This works best with stationary panels; it’s not appropriate for curtains that must be opened and closed frequently.
How long should my shower curtain rod be?
You should hang the shower curtain rod three to five inches higher than the length of the curtain. Since most shower curtains are 72 inches long, this means that you should hang the rod 75 to 77 inches high, depending on the size of the rings or hooks.
How to shorten curtains temporarily?
When curtains appear too long, try sewing a hem, which can allow you to shorten curtains without cutting curtains to length so you can retain the fabric if you want to. Another way of shortening curtains is to incorporate a folded design with buttons as fasteners. Folding the curtain hem up creates a double hem.
Can u wash shower curtains?
Over time, shower curtains become dirty due to mould, mildew and a build-up of soap scum. But when this occurs, it doesn’t always mean you have to throw it away and get a new one. Shower curtains can easily be washed and refreshed, and the majority of shower curtains and liners can be cleaned in a washing machine.
Can my curtains hang high?
A rule of thumb (from Architectural Digest) is that curtains should be hung between four to six inches above the window frame, so install your curtain rod accordingly. When you hang the curtain rod high, it will make the window appear taller.
Can i trim beaded curtains?
A: You can hang your beaded curtain inside or outside of a door frame. … For some beaded curtains, it is also possible to trim the curtain to your width.
What is a 1 panel curtain?
It means there’s only one side! Like you see in the picture it showed two curtains 1 panel means you only get one side. So if you’re looking to part them in the middle like in the picture you’ll need to buy more then one panel. … It means only one curtain.
How to measure curtain pole diameter?
You’re measuring from the end of the inside mark to the far edge of the paper to get the circumference of your pole. You should be able to measure to the nearest half millimeter.
How to make curtain rods from wooden dowels?
Find and mark the center of one end of the dowel. Drill a 3/16 inch hole one inch deep at the center mark. Use pliers to screw one end of the dowel screw into the dowel, then screw the other dowel onto that. Sand and apply clear finish* to dowel rods.
How to clean shower curtain in bathtub?
First, mix one part white vinegar to four parts water in a spray bottle. Close the shower curtain so it extends the full length of the tub or stall, and, on the tub-side, spray with the vinegar and water solution. The vinegar will work to break down soap scum and mold.